What 8.5 gpg means for a home in Ames
Of the 10 cities in our directory so far, Ames ranks #7 for hardness, harder than 33% of them. That is well below the directory median of 196 mg/L. A three-person household using typical amounts sends roughly 99.5 lb of dissolved hardness minerals a year through its pipes and appliances. Some of that ends up as scale anywhere the water is heated or left to evaporate.
Ames is a clear example of what a city softening plant does. The well water arriving at the plant averaged 426 ppm in October 2026, about 24.9 gpg, which is extremely hard. Lime softening brings it down to 145 ppm (8.47 gpg) before it reaches homes.
Ames posts these figures every month instead of once a year, so the number here is a monthly average and will move a little. A treated-water reading between roughly 8 and 9 gpg is the realistic range to plan around.
Ames also adds polyphosphate after softening to help keep scale from forming. You will still see some spotting at about 8.5 gpg, but less crust on fixtures than the raw hardness would suggest.
Where the water comes from: 22 to 23 groundwater wells drawing from sand and gravel deposits along the buried channels of Ioway Creek and the South Skunk River. The utility softens the water centrally before it reaches homes.
What size water softener for Ames?
The table assumes 75 gallons per person per day and one regeneration about every seven days at a salt-efficient setting.
| Household | Grains / day | Recommended size | Regenerates every |
|---|---|---|---|
| 1 person | 636 | 24,000 | 14+ days |
| 2 people | 1,272 | 24,000 | 12 days |
| 3 people | 1,908 | 24,000 | 8 days |
| 4 people | 2,544 | 32,000 | 8 days |
| 5 people | 3,180 | 40,000 | 8 days |
Sizes are rated grain capacities of common residential units. If you also have iron, or use far more water than average, use the calculator below. Method.
Sized for one regeneration roughly every 7 days, assuming a salt-efficient setting delivers about two thirds of a unit's rated capacity. How we calculate this.
Protecting appliances at 8.5 gpg
- Tank water heaters: flush sediment once a year. Scale insulates the bottom of the tank, so the burner or element runs longer for the same hot water.
- Tankless heaters: 8.5 gpg is near or above the limit many manufacturers set. Plan an annual descaling flush, or fit a scale inhibitor if you're not softening.
- Dishwashers: use rinse aid. On models with a hardness dial, set it to about 8 gpg (8 °dH). Cloudy glasses mean the setting is too low.
- Kettles and coffee makers: descale every four to six weeks with citric acid or a commercial descaler.
- Fixtures: wipe glass shower doors after use. Hard-water spots etch glass if they are left for months.
Testing and treatment options
Disclosure: some links below are affiliate links. If you buy through them, Hardness Index may earn a commission at no extra cost to you. It never changes the data on this page. Details.
Hardness test strips
A few dollars to confirm the utility figure at your own tap before you size anything. Look for strips that read in gpg up to at least 25.
See test strips AFFILIATE_LINK_AMAZON_TEST_STRIPSSalt-based softener, 32k grain
The size we'd pick for a family of four in Ames. Choose a metered (demand-initiated) valve so it regenerates by use, not by the calendar.
Compare softeners AFFILIATE_LINK_SPRINGWELLSalt-free scale conditioner
Template-assisted crystallization (TAC) units reduce scale on heaters without removing minerals. They won't stop spotting on glass and are less proven above about 25 gpg.
See conditioners AFFILIATE_LINK_AQUASANAWhere this number comes from
- Publisher
- City of Ames Water & Pollution Control
- Water system
- City of Ames Water Treatment Plant
- Data period
- October 2026 monthly average (page updated monthly)
- Figure type
- Monthly average
- Accessed
- November 18, 2026
- URL
- cityofames.org
- ZIP codes
- 50010, 50011, 50012, 50013, 50014 (postal city “Ames”. Utility boundaries may differ.)
“Treated Water Quality — Total Hardness, ppm: 145; Total Hardness, grains per gallon: 8.47. Raw Water Quality — Total Hardness, ppm: 426.”
Ames water hardness: common questions
Is Ames water hard?
Yes. At 145 mg/L (8.5 gpg) it is hard by the USGS definition. The figure comes from City of Ames Water & Pollution Control (October 2026 monthly average (page updated monthly)).
What should I set my water softener to in Ames?
Start at 8 gpg. If you still see spots on glassware after a couple of weeks, raise it by 2 gpg. A test strip on softened water should read 0–1 gpg.
What size softener does a family of four need?
About 2,544 grains a day, so a 32,000-grain unit regenerating roughly every 8 days.
Does this apply if I'm on a private well?
No. Private wells around Ames draw from different depths and formations and can measure very differently. Test the well directly. A lab test also checks iron, which affects softener sizing.