Water softener size calculator
Enter your water's hardness and your household. The result is a rated grain capacity that regenerates about once a week at a salt-efficient setting, which is how installers size units that last.
Sized for one regeneration roughly every 7 days, assuming a salt-efficient setting delivers about two thirds of a unit's rated capacity. How we calculate this.
The formula
Daily load = hardness (gpg) × people × gallons per person per day.
Rated capacity needed = daily load × 7 ÷ ⅔, rounded up to the next standard size (24k, 32k, 40k, 48k, 64k, 80k).
The ⅔ factor matters. A "48,000-grain" softener reaches that rating only at its maximum salt dose. Run at an efficient dose, it typically delivers about two thirds of that. Sizing to the efficient figure saves salt every week for the life of the unit.
Don't know your hardness?
Search for your city above. Every figure we list comes from the utility's own report. If you're on a private well, use a test kit. Well water varies too much from one property to the next to estimate.
Have iron? Enter it in ppm. Softeners remove small amounts of clear-water (ferrous) iron, and the usual rule of thumb is to add about 4 gpg of load for each 1 ppm.